Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only) Contains
Mercury,
Dispose According to Local, State or Federal Laws
Wiring the Mains Power Supply Plug(UK Only) IMPORTANT
NOTICE
The mains lead on this equipment
is
supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face
of the plug and, if it requires replacing, a fuse approved
to
BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover
is
detachable. If a replacement fuse cover is required, it must be of the same
colour as the pin face
of
the plug. Replacement covers are available from your dealer.
If the fitted plug
is
not suitable for the power points
in
your house
or
the cable is not long enough
to
reach a power point, you should
obtain a suitable safety approved extension lead
or
consult your dealer for assistance. However, if there
is
no alternative but
to
cut off the
plug, remove the fuse and then safely dispose
of
the plug.
Do NOT connect the plug
to
a mains socket as there is a risk
of
shock hazard from the bared flexible cord.
IMPORTANT
The wires
in
the mains lead are coloured
in
accordance with the following code:
BLUE -NEUTRAL BROWN -
LIVE
As these colours may not correspond
to
the coloured markings identifying the terminals
in
your plug, proceed as
follows:
The wire coloured BLUE must be connected
to
the terminal marked with the letter N
or
coloured BLUE
or
BLACK. The wire coloured
BROWN must be connected
to
the terminal marked with the letter
Lor
coloured BROWN
or
RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH
IS
MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL
,
OR
COLOURED GREEN
OR
GREEN AND YELLOW.