Samsung VC20F70HNAR/MG manual Power Control, Hose Handle SC20F70H Series, Hose SC07F70H Series

POWER CONTROL

Hose Handle (SC20F70H Series)

1.	ON/OFF [	] Button
--	Press the ON/OFF button to operate the vacuum cleaner.
	Press again to stop the vacuum cleaner.
2.	[(-/+)] Button
--	Press the MODE button repeatedly to select the correct mode.
	(ON) MIN → MAX
3.	[ ] Button
--	Press the [	] button to operate the vacuum cleaner quietly.

Don’t cover the handle transmitter when you use a handle control button.

HOSE (SC07F70H Series)

1.	ON/OFF [ ] Button
--	Press the ON/OFF button to operate the vacuum cleaner.
	Press again to stop the vacuum cleaner.
2.	[(-)], [(+)] Button
--	Press the (+) button to increase the vacuum's suction power.
	Press the (-) button to decrease the vacuum's suction power.

Don’t cover the handle transmitter when you use a handle control button.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off.

In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

sender

-/+

Handle Control

The cleaner is controlled by radio

frequency signals.

sender

- +

Handle Control

The cleaner is controlled by radio

frequency signals.

HOSE (SC20F70U Series)

1.	ON/OFF [	] Button
--	Press the [	] button to operate the vacuum cleaner. Press
	again to stop the vacuum cleaner.
2.	[SUCTION (-/+)] Button
--	Press the [SUCTION (-/+)] button to increase or decrease the
	suction power. Each time you press the button, you gradually
	increase the suction power. After the suction power reaches its
	maximum, the next time you press the button, you return the
	suction power to its minimum.
3.	[BRUSH ON/OFF] Button
--	Press the [BRUSH ON/OFF] button to operate the UV Brush.
	Press again to stop the UV Brush.

sender

Handle Control

The cleaner is controlled by radio

frequency signals.

Don’t cover the handle transmitter when you use a handle control button.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off.

In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

10_ operating the cleaner