2 OPERATING THE CLEANER

2-1 POWER CORD

 

NOTE

Please make sure your

When removing the

plug from the

cable is fully extended

electrical outlet, grasp

before use.

the plug, not the cord.

2-2 POWER CONTROL (INFRARED CONTROL)

- HOSESENDERHANDLE CONTROL

[The cleaner is controlled by using

infrared signals.]

- BODY

1. Vacuum cleaner ON/OFF

Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

2. Vacuum cleaner MODE (+/-)

Press the MODE button repeatedly to select the correct mode.

(ON) MIN → MID → MAX

3. Using Auto mode

Press the Auto button to operate the vacuum cleaner automatically.

Press the power control button repeatedly to select the correct mode.

(ON(MAX) → OFF)

NOTE : If the remote handle control is not working, the cleaner can be operated using the control button on the body of the machine.

The filter light is illuminated when the dust pack requires checking or emptying.

An audio signal will also sound.

The IR light indicates the part that receives the infra-red signal from the handle control.

This shows the generation of negative ions when the vacuum cleaner is in operation.

This indicates that the automatic suction mode is selected.

The level of suction is indicated by the LED display.

EN-3