troubleshooting

PROBLEM

SOLUTION

Motor does not start

• Check cable, pulg and socket.

• Leave to cool.

 

 

 

Suction force is gradually

• Check for blockage and remove.

decreasing

 

 

 

Cord does not rewind fully

• Pull the cord out 2-3m and push down the cord rewind button.

 

 

Vacuum cleaner does not

• Check hose and replace if required.

pick up dirt

 

 

 

Low or decreasing suction

• Please check filter and, if required, clean as illustrated in the

instructions. if filters are out of condition change them to new ones.

 

Body overheating

• Please check filters, If required clean as illustrated in the instruction.

Static electicity discharge

• Please decrease power suction.

This Vacuum cleaner is approved the following. EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

Code NO. DJ68-00467M REV(0.0)

Page 64
Image 64
Samsung VCC87H0H3K/XEG manual Troubleshooting, Problem Solution