POWER CONTROL
RADIO FREQUENCY REMOTE-CONTROL
- HOSE
1. Vacuum cleaner ON/OFF( 
)
Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.
2.Vacuum cleaner
increase the suction power. After you press the suction button three times, the vacuum reaches its maximum suction power. Then, an additional press will set the vacuum to Auto mode. In Auto
mode, the vacuum adjusts the suction power automatically. After the vacuum has reached Auto mode, when you press the button, you return it to its minimum suction power.
In short, suction operates in this sequence: 1 - 2 - 3 - AUTO - 1 - 2 - 3 - AUTO, etc.
3.BRUSH ON/OFF
Press the BRUSH ON/OFF button to operate the Power Brush. Press again to stop the Power Brush.
Don’t cover the handle transmitter when you use a handle control button.
FCC NOTICE / FCC ID : A3LROH20S
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
02 OPERATING THE VACUUM
- BODY
Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner.
(OFF → ON → OFF)
If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine.
1
2
3
1 | The ON/OFF button operates the vacuum cleanner or stops it. | |
|
| |
2 | The filter light is illuminated when the dust pack requires checking or | |
emptying. An audio signal will also sound. | ||
|
3This indicates that the automatic suction mode is selected. The level of suction is indicated by the LED display.
