A s s e m bl i n g Pa r t s

Assembled Vacuum Cleaner Parts

1-1

Front

Back

The assembled cleaner will look like the illustration to the left.

1.Handle 2.Power switch

3.Quick release cord hook 4.Post-Motor Filter 5.Crevice tool

6.Handle release 7.Carrying handle 8.Hose 9.Extension wand 10.Combination tool 11.Cyclone-Lever 12.Dirt Cup 13.Filter Cup 14.Upper Tank 15.Louvers 16.Hose Wand Base 17.Height Adjustment Dial 18.Hose Clip

WARNING!

OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE.

Step 1. Attaching the Handle

1-2

Stand the vacuum upright 1-3

 

and slide the base of the

 

handle firmly into the

 

grooves at the top of the

 

vacuum body.

Step 2. Attaching the Hose and Tools

1-4

Slide the end of the hose

1-5

 

wand with tabs into the

 

 

Hose Wand Base.

 

Insert the screw provided into the existing hole. Tighten the screw securely with a screwdriver.

Before securing the handle, please check that the handle is fitted to the vacuum body and make sure there’s no gap.

Slide the extension wand and the crevice tool together into the storage clip.

2