O p e r a t i o n

2-1

ON-OFF Switch

1.To turn cleaner on, press the Power switch.

2.To the cleaner off, press the Power switch again .

2-2

Handle positions

The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle.

2-3

Transporting cleaner

To move your cleaner from room to room, put the handle in upright position, tilt the cleaner back on its rear wheels and push forward.

2-4

Carrying handle

The cleaner can also be moved by using the carrying handle.

2-6

2-5

A

B

C

�option

Cleaning Tool attachments

Attachment tools can be used to clean furniture or drapes, on stairs or in corners.

When using the attachments, ensure the vacuum cleaner is placed firmly on the floor with the handle in the upright position. Do not place the vacuum on top of furniture or steps as the brushroller may cause damage.

A. Combination tool:

Two types of cleaning tools are included in one attachment: rotate for desired tool. ∙Use brush side to dust furniture,

blinds, books, lamps, shelves.

∙Use upholstery side for curtains, draperies, cushions, fabrics.

B. Crevice tool:

Use in corners, on stairs, baseboards, and behind furniture.

C. Extension Wand:

Use with desired attachments and narrow wand for a longer reach.

�option : Mini Turbo Brush

Refer to the separated instruction.

Cleaning lightweight flexible rugs

Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle(front of cleaner)and will prevent rug from clinging to cleaner.

Continue to lift front of cleaner so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower front of cleaner, and use only forward strokes.

2-7

Carpet height adjustment

 

Carpet and rug cleaning takes place at the

 

nozzle (A).

 

When it is necessary to raise and lower the

 

nozzle for various carpet pile heights, rotate the

 

nozzle control dial (B) to the desired setting.

2-8

For maximum cleaning performance, The

following carpet height settings are recommended:

 

 

∙Lowest setting: for all types of carpet

 

∙Higher settings: for very deep pile carpet where

 

easier pushing effort is desired, while maintaining

 

good cleaning performance.

 

Note: If the cleaner is difficult to push, rotate knob to

 

the next higher setting.

3