Samsung VCU4060S4K/XEU Assembling the cleaner, Attach Handle to Vacuum, Attach Dust BIN to Vacuum

Assembling the cleaner

ATTACH HANDLE TO VACUUM

1.Stand the vacuum upright and slide the base of

the handle fi rmly into the grooves at the top of the vacuum body.

2. Check to be sure the handle is fi tted to the vacuum body. If there is a gap, continue to push fi rmly until the handle is fl ush.

3. Insert the screw provided from the screw packet into the existing hole. Tighten securely with a screwdriver.

4. Attach the hose clip into the handle of the unit. Secure it by inserting a short screw provided.

ATTACH DUST BIN TO VACUUM

Fit the groove located on the lower front side of the Dust Bin to the hook located on the vacuum body and attach the hook located on the Dust Bin Handle to the vacuum body as shown.

ATTACH VACUUM HOSE AND TOOLS

01 ASSEMBLING THE CLEANER

1.Attach the Twist Snap Hose by lining up the taps on the base with the corresponding

notches on the back of the vacuum as shown.

2. Turn the Twist Snap Hose clockwise to lock the hose into place.

3.Grasping the Hose Wand, slide the end of the it onto the Hose Wand Base. Snap the Hose into

the Hose Clip.

Note : The vacuum will not operate effectively unless the Hose Wand is fi rmly attached.

4.	Attach the Lower Cord Wrap by lining up the
	tab on the base with the corresponding notch
	on the back of the vacuum and turn it clockwise
	as shown.	2
5.	Attach the Extension Wand and the Crevice
	Tool together into the holder on the right side of
	the body as shown.	1
6.	Attach the Combination Tool into the holder on

the left side of the body as shown.

7.Store Mini Turbo Brush on the front of the handle by lining up the Mini Turbo Brush base

with the base of the holder then push back to snap into place.

2

1

*Option

assembling the cleaner _07