ENGLISH
Advanced Recording
●DEMONSTRATION
✤Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily.
✤The DEMONSTRATION function may only be used in the CAM mode without a tape inserted in the camcorder.
✤The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF.
1.Set the camcorder to CAM mode.
2.Press the MENU button.
■The menu list will appear.
3.Move the MENU SELECTOR to highlight INITIAL.
4.Select DEMONSTRATION from the submenu and push the MENU SELECTOR.
5.To activate the DEMONSTRATION, set DEMONSTRATION ON.
■Press the menu button to quit the menu.
■The demonstration will begin.
6.To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Notes
CAM MODE
INITIAL | CLOCK SET | |
CAMERA | WL. REMOTE | |
A/V | BEEP SOUND | |
MEMORY | SHUT. SOUND | |
VIEWER | ||
DEMO | ||
|
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
■The DEMONSTRATION function only works without a TAPE installed.
■The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after switching to the CAM mode (no tape is inserted in the camcorder).
■If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.
■While setting the NIGHT CAPTURE to ON, the DEMONSTRATION function does not work.
42
