Manuals / Samsung / Home Audio / Stereo Amplifier

Samsung VP-D200(I) manual Maintenance, After finishing a recording, English

Models: VP-D200(I)

1 109
Download 109 pages 44.4 Kb
Page 100
Image 100
Maintenance

ENGLISH

Maintenance

After finishing a recording

✤At the end of a recording you must remove the power source.

✤When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder.

1.Slide the TAPE EJECT switch in the direction of the arrow.

■Opening the cassette door ejects the tape automatically.

■Please wait while the tape is completely ejected.

2.After removing the tape, close the door and store the camcorder in a dust free environment.

■Dust and other foreign materials can cause square-shaped noise or jerky images.

3.Set the power switch to the OFF mode.

4.Disconnect the power source or remove the Lithium Ion Battery Pack.

■Press the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.

1

3

2

100

Page 99 Page 101
Page 100
Image 100
Samsung VP-D200(I) manual Maintenance, After finishing a recording, English
Page 99 Page 101

FAQ

What should I do after finishing a recording?

After finishing a recording, remove the power source and store the camcorder in a dust-free environment to prevent noise or jerky images in future recordings.

Why should I remove the Lithium Ion Battery Pack after recording?

Leaving the battery pack on the camcorder can reduce its lifespan. It's important to remove and store it properly to maintain its longevity.

How do I eject the tape from the camcorder?

To eject the tape, slide the TAPE EJECT switch and the cassette door will open automatically.

Where should I store the camcorder after removing the tape?

After removing the tape, store the camcorder in a dust-free environment to prevent square-shaped noise or jerky images in future recordings.