ENGLISH
6464
Connecting to a TV which has no Audio/Video Input Jacks
✤You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with the Multi Cable.
■The yellow jack: Video
■The white jack: Audio(L) - Mono
■The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
5. Turn on both the TV and VCR.
■Set the input selector on the VCR to Line.
■Select the channel reserved for your VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the tape you wish to play back.
4. Using the
[œœœœ (REW)]
/
[√√√√(FF)]
buttons, find the first position you wish to play back.
5. Press the
[√√
/
■■
(PLAY/STILL)
]
button.
■The images you recorded will appear on the TV after a few seconds.
■If a tape reaches its end while being played back, the tape will rewind automatically.
[ Notes ]
■The playback mode (SP/LP) is selected automatically.
■If the VCR has an S-Video input terminal, you may use S-Video connector for better quality.
■The S-Video connector transmits video only. Connect audio cables for sound.
■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).
Playback
AV/ S
Antenna
Multi Cable
Signal flow
TV
VCR
Camcorder
C
A
M
E
R
A
C
A
M
E
R
A
P
L
A
Y
E
R
Y
E
R
Multi Cable
01040E VPD963 UK~066 3/20/06 12:32 PM Page 64