English _57
TAKING PHOTO IMAGES
• You should set the Storage mode switch to CARD before recording on a memory card.
• You can take photo images using the remote control. page 13
(VP-DX104/DX105(i) only)
1. Slide the POWER switch downwards to turn the DVD camcorder on.
• Set the Storage mode switch to CARD. page 30
2. Check the subject on the LCD screen. (Lens and LCD)
• Set the Lens open/close switch to open ( ). page 10
3. Press the PHOTO button to take the picture.
• A shutter sound is heard. The photo image is recorded with the “Photo capture”
message appeared.
• While saving the photo image on the memory card, you cannot proceed with the next
recording.
• You can use the zoom function while recording. page 37
• The number of photo images that can be stored depends on the quality and size of
the image. page 55
• The photo image is taken only in the 4:3 aspect ratio on the memory card.
• Audio will not be recorded with the photo image on the memory card.
• Please check the protection tab setting on your memory card before recording.
You may not be able to record when it is locked.
• If focussing is difficult, use the manual focus function. page 70
• Do not operate the POWER switch or remove the memory card while accessing
the storage media. It may damage the storage media or data.
• Photo images are actually wider than what appears on the LCD screen.
• The recorded photo image size is 800X600.
����
STBY 0:00:00 [64 min]
4830
Photo capture
(AD68-02550G) VP-DX100_ENG_IB.indb 57 2008-03-06 ¿ÀÈÄ 2:29:44