English _49
DISC UNFINALISE ( ( ))
• This function works only in the Record mode. page 21
• If a DVD-RW disc had been finalised in the VR mode or Video mode, you can unfinalise the disc for further
recording. When unfinalising, there should be enough power in the batteries. If the AC power adaptor is to be
used, make sure that the jack is properly connected.
1. Slide the POWER switch downwards to turn on the power. page 21
2. Set the Storage mode switch to DISC. (VP-DX103( i )/DX104/DX105(i ) only) page 30
3. Press the MENU button, then move the Joystick right or left to select “Disc Manage.”
4. Move the Joystick up or down to select “Disc Unfinalise,” then press the Joystick.
• You can simply unfinalise the disc using the FINALIZE button on the DVD camcorder.
• Disc information will appear.
5. Move the Joystick to select “Execute,” then press the Joystick.
• To exit, use the Joystick to select “Back,” the press the Joystick.
6. The message “Make the disc recordable?” will appear. Move the Joystick right or left
to select “Yes,” then press the Joystick.
• The message showing that the disc is being unfinalised will appear, and the disc will
be unfinalised.
WARNING
• The unfinalise function is not available at the battery level under ( ).
• During unfinalising, do not cause impact or vibration to your DVD camcorder.
This could cause a malfunction. Now Unfinalising...
Avoid Shock & Vibration
Now Unfinalising...Now Unfinalising...
Avoid Shock & VibrationAvoid Shock & Vibration
Unfinalise
Disc Name 01/JAN/2008
Disc Type DVD-RW [Finalised]
Disc Format VR Mode
Used 0:10:00
Free 0:20:00 [Fine]
Back Execute
Disc Manage
Disc Finalise
Disc Unfinalise
Disc Format
Disc Info
STBY 0:00:00 [30 min]
(AD68-02550G) VP-DX100_ENG_IB.indb 49 2008-03-06 ¿ÀÈÄ 2:29:03