ENGLISH
Setting the Memory Camcorder : Using USB Mode
Using the PC Cam Function
You can use your Memory Camcorder as a PC camera for video chatting, video conference and 3 | System Settings | |
other PC camera applications. | TYPE | |
Before your start! | USB Mode | |
Mass Storage | ||
◆ For PC Cam use, it is required to install the DV Driver.➥page 119 | PictBridge | |
1. Press the [POWER] button to turn on the Memory Camcorder. | ||
|
◆The Movie Record screen appears.
2.Set the System Settings mode by pressing the [MODE] button.
◆The System Settings screen appears.
3.Move the [Joystick] left / right to select <USB Mode>.
4.Move the [Joystick] up / down to select
5.Turn on your PC.
6.Connect the Memory Camcorder to your PC with the USB cable.
7.The Memory Camcorder can be used as a PC Cam for programmes such as Windows Messenger.
◆Various applications take advantage of the PC Cam function. Refer to respective product documentation for further details.
8.When finished, disconnect the USB cable.
Move OK Select
4 | System Settings | |
| TYPE |
|
| USB Mode | |
| Mass Storage | |
| PictBridge |
|
|
| |
| Move | OK Select |
Open the front cover and connect the USB cable.
[ Notes ]
✤You must install the DV Driver. ➥page 119
✤When the USB port connection changed, it may require DV Driver
✤It is recommended to use an AC Power Adapter during data transfer to avoid unintended power outages.
✤Microsoft Windows 98 SE or later operating systems support the PC Cam function.
| USB |
| USB cable |
| MMC/SD |
USB | USB |
116