ENGLISH
Setting the Memory Camcorder : Adjusting the LCD monitor
Adjusting the LCD Brightness
You can adjust the brightness of the LCD monitor to compensate for ambient lighting conditions.
1. Press the [POWER] button to turn on the Memory Camcorder.
◆ The Movie Record screen appears. | 3 | System Settings |
|
|
| RGB | 12 |
|
| 24 | |
|
|
|
2. Set the System Settings mode by pressing the [MODE] button.
LCD Brightness
30%
◆ The System Settings screen appears.
Move Adjust OK Set
3. Move the [Joystick] left / right to select <LCD Brightness>. | 4 | System Settings |
|
|
| RGB | 12 |
|
|
| 24 |
|
| LCD Brightness |
|
4.Move the [Joystick] up / down to adjust the brightness, and then press the [Joystick(OK)].
◆Moving the [Joystick] up will brighten the screen whereas moving it down will darken the screen.
◆Brightness range: You can adjust the LCD Brightness from 0% to 100%.
| 60% |
Move | Adjust OK Set |
5.After you finish setting, move to the desired mode by pressing the [MODE] button.
[ Notes ]
✤A brighter LCD screen setting consumes more battery power.
✤Adjust the LCD brightness when the ambient lighting is too bright and the monitor is hard to see.
✤LCD Brightness does not affect the brightness of images to be stored.
101