ENGLISH
Advanced Shooting
Snap Shot (VP-W63 only)
✤With the SNAP SHOT feature, your camcorder can function like a normal film camera, allowing you to take single still pictures.
- The SNAP SHOT function only operates in the CAMERA mode.
1. Set the power switch to CAMERA mode.
CAMERA
2. Press the SNAP SHOT button when you have the picture you wish to capture.
■ At this time, be careful not to shake your camcorder because the image will be indistinctly recorded.
3.Once the SNAP SHOT button has been pressed, your camcorder will automatically return to STANDBY mode after approximately 6 seconds.
■You can check the remaining available SNAP SHOT space by looking at the time displayed on the screen.
■To stop SNAP SHOT shooting, press the SNAP SHOT
button again.
Notes:
■If the camcorder is knocked or shaken while taking a SNAP SHOT, the image may be blurred.
■The SNAP SHOT is activated in recording.
■When the SNAP SHOT button is pressed in CAMERA mode with no tape installed, a still image will be displayed in the viewfinder.
■The SNAP SHOT function will not operate in EASY, MENU or CUSTOM modes.
46
