WASHING PROCEDURE

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)

FUZZY COURSE
Selects the best washing course POWER

START/

HOLD

automatically.

 

1.Press the POWER Button to"ON".2.Press the START/HOLD button.

Water level is selected automatically. Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLDbutton again.You can change the course when paused.3.Close the lid. BLANKET COURSE

START/

POWER COURSE HOLD

1.Press the power button to "ON".2.Press the course select button once.3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid. SPEEDY COURSE

START/

POWER COURSE HOLD

Because washing is speedy, it is good for light or less stained laundry.

1.Press the power button to "ON".

2.Press the course select button twice.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid.

Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent

for the fabrics you are washing. WOOL COURSE

POWER COURSE START/

HOLD

1.Press the power button to "ON". 2.Press the course select three times. 3.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

DELAY START COURSE

POWER

COURSE

DELAY

START/

START

HOLD

 

 

Select this course when you have to go out or dosomething else.

1.Press the power button to "ON".

2.Press the DELAY START button once.You may change the delay start time with use the DEALY START button.(from 3 hours to 18 hours)

3.Press the START/HOLD button and put the proper amount of detergent into tub.

4.Close the lid.

The washing finishes by the time you reserved.

5