HOW TO CONNECT THE DRAIN HOSE (OPTION)

IN CASE OF PUMP-DRAINED WASHER

cap-hose

Take out the cap-hose and connect the

Be sure to join tightly the drain hose into the

outlet-hose.

drainoutlet on the back of the machine.

 

Drain hose

 

90~100 cm

 

Hose guide

Be sure to join tightly the drain hose into the

Install the drain hose in the position of about

drain-outlet on the side of the machine.

90~100 cm above the ground. The end of the

 

drain hose can not be sinked under water.

IN CASE OF GENERAL WASHER

1.After pressing the joint ring, insert to the drain hose.

2.After directing the drain hose to a drain, join to the drainoutlet of the washing machine.

MAINTENANCE & INSTALLATION 03

drain-outlet

3.Be sure to join them tightly by pressing the joint ring and

pushing it into the drain-outlet.

• The length of drain hose is adjustable so that you can extend the length appropriately.

HOW TO CHANGE THE DRAIN HOSE DIRECTION

• The handle of joint ring is pressed to pull out the drain hose. Change the direction of the drain hose and follow the above guideline again.

installation & maintenance_19

F500S_W3050_WA11F5-03272E_EN.indd Sec5:19

2013-04-09 ￿￿ 4:01:48