WASHING PROCEDURE

SPEEDY COURSE

POWER

COURSE

START/

 

HOLD

Because washing is speedy,

 

 

 

 

 

it is good for light or

 

 

 

less stained laundry.

 

 

 

1.Press the power button to "ON".

2.Press the course select button twice.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4. Close the lid.

WOOL COURSE

 

 

START/

 

POWER

COURSE

1.Press the power button to

HOLD

 

 

"ON".

2.Press the course select three times. 3.Press the START/HOLD button.

Washing,rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused. 4. Close the lid.

CAUTION . . .

-Do not use water above 30˚C for WOOL washing. -Refer to the tag attached on the clothes for washing information.

-Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry.

-When the degree of dirt is extreme, soak the laundry in warm water for about 10 minutes before pressing the WOOL course button in order to enhance washing efficiency.

ECO+ COURSE

START/

1. Press the power button to POWER COURSE

HOLD

"ON".

 

2.Press the course select button four times.

3.Press the START/HOLD button

Water level is selected automatically. Washing, rinsing, and spinning follow.

If you want to pause, press the START/HOLD

button again.You can change the course when paused.

4.Close the lid.

DELAY START COURSE

POWER

COURSE

DELAY

START/

START

HOLD

 

 

Select this course when you have to go out or do something else.

1.Press the power button to "ON".

2.Press the DELAY START button once.

You may change the delay start time with

use the DEALY START button. (from 3 hours to 18 hours)

3.Press the START/HOLD button and put the proper amount of detergent into tub.

4.Close the lid.

The washing finishes by the time you reserved.

CLEANING THE TUB

POWER

COURSE

FUNCTION

WATER

START/

LEVEL

HOLD

 

 

 

1.Press the POWER button.

2.Press the COURSE button to select the BLANKET course.

3.Press the FUNCTION button to select SOAK.

- You can select the water supply or temperature (hot/cold).

4.Press the WATER LEVEL button to select HIGH.

5.Press the START/HOLD button.

6.Add a dedicated detergent and close the lid.

NOTE

-Never place laundry in the tub when cleaning inside the tub, as this can cause discoloration or damage to the laundry.

-When doing the laundry after cleaning the tub, you may find some impurities.

These are just detergent residues and impurities after the tub cleaning.

Perform the rinse cycle two to three times.

※Keeping the tub clean

When using the machine under humid condi- tions for an extended time, various bacteria from the air may stick to the tub and form black dirt (fungi), causing damage to the human body. To keep the tub clean and hygienic at all times, it is recommended reading “Cleaning the Tub” above and using only dedicated or recommended deter- gents to clean the tub regularly at least once every one to three months.

5