JVC SP-UXH100 manual Using the Timers, Using the Daily Timer, Press SET to set the on-timeyou want

Models: CA-UXH100 SP-UXH100 UX-H100

1 80
Download 80 pages 62.47 Kb
Page 22
Image 22
Using the Timers

Using the Timers

Daily Timer and Sleep Timer are available.

Before using these timers, make sure the built-in clock is set correctly (see page 8).

Using the Daily Timer

You can store three Daily timer settings and use one of settings at once.

How the Daily Timer actually works

When the on-time comes, the unit automatically turns on and automatically turns off (standby) after 60 minutes.

Once the timer has been set, it will be activated at the same time everyday until the timer is turned off and the timer setting remains in memory until you change it.

Before you start...

When using “TUNER” as the source to play, make sure to select the desired station before turning off the power.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

3 Press SET to set the on-time you want

SET

 

the unit to turn on.

 

The hour indication starts flashing on the display.

Using the Daily Timer 1 How the Daily Timer actually works

(1) Press ¢ or 4 to set the hour, then

press SET.SET

(2) Press ¢ or 4 to set the minute, then press SET.

If you want to change the time setting, press

CANCEL.

4 Press ¢ or 4 to select the source to play.

Before you start... 1 3 Press SET to set the on-time you want

On the remote control ONLY:

1 Press STANDBY/ON the unit to turn on. to turn on the unit.

2 Press CLOCK/TIMER repeatedly to select the Daily Timer you want to adjust and activate—Daily 1, Daily 2, Daily 3.

STANDBY/ON

CLOCK/

TIMER

Each time you press the button, the source changes as follows:

4 Press ¢ or 4 to select the source to play. TUNER 1 Press STANDBY/ON  to turn on the unit.5 Press SET. CD Press VOLUME +/– to adjust the volume.Press STANDBY/ON  to turn off the unit. AUX Manual backgroundManual background

When selecting AUX, prepare the external equipment so that it will turn on at the on-time set on the unit.

To allow this, the equipment should have the timer function.

If you want to change the time setting, press CANCEL repeatedly to return Step 3.

Each time you press the button, the display changes as follows:

Manual background 1 Manual background

Daily 1 Timer

5 Press SET.

SET

The Daily Timer number remains lit. The display returns to the normal indication.

When you want to activate other timer than the adjusted one, press TIMER on the unit repeatedly. See also “To change the Daily Timer to use” on page 20 for details.

Manual background 2 Manual background

Daily 2 Timer

Manual backgroundManual background 3 Manual background

Daily 3 Timer

Present time indication (Clock setting)

Normal indication

If you does not need to change the on-time setting, go to step 3.

6

7

Press VOLUME +/– to adjust the volume.

Press STANDBY/ON Manual background to turn off the unit.

VOLUME

STANDBY/ON

19

Page 22
Image 22
JVC SP-UXH100, UX-H100 Using the Timers, Using the Daily Timer, Press SET to set the on-timeyou want, the unit to turn on