JVC CA-UXH100, UX-H100, SP-UXH100 manual Presetting Stations

English

Listening to FM and AM Broadcasts (continued)

Presetting Stations

You can preset 30 FM and 15 AM stations manually.

In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

On the remote control ONLY:

1 Tune in to the station you want to preset.

	• See “Tuning in to a Station” on page 10.
2	Press PLAY MODE.	PLAY
		MODE
	The preset number starts flashing on the
	display.
	• The PRGM (program) indicator lights up on the
	display.
	PRGM

Tuning in to a Preset Station

On the remote control ONLY:

1 Press FM/AM to select either “FM” FM/AM or “AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2 Press PRESET UP or	PRESET UP
PRESET DOWN repeatedly to
select a preset number.
	PRESET DOWN

To tune in to a preset station directly using the number buttons

On the remote control ONLY:

Pressing the number button(s) allows you to select the preset number you want.

Ex.: For preset number 5, press 5.	1	2	3
For preset number 15, press +10, then	4	5	6
5.

3 Press ¢ or 4 to select a preset number.

PRGM

You can also use the number button(s) to select a preset number.

Ex.: For preset number 5, press 5. For preset number 15, press +10,

then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

10 +10

For preset number 20, press +10, then	7	8	9
10.	10	+10
For preset number 30, press +10, +10,

then 10.

4	Press PLAY MODE again.	PLAY
		MODE

5 To preset more stations, repeat steps 1 to 4 above, allocating a different preset number to each station.

•Storing a new station on an already assigned number erases the previously stored one.

When you unplug the AC power cord or if a power failure occurs

The preset stations will remain in the unit.

11