English
Getting Started (continued)
To connect AM and FM antennas
1 AM loop antenna (supplied)
ANTENNA |
|
|
AM |
|
|
LOOP |
|
|
FM |
|
|
ANTENNA | 2 |
|
| FM antenna |
1Connect the supplied AM loop antenna to the
AM LOOP terminal.
Place the antenna away from the unit and adjust its position for the best reception.
2Adjust the position for the FM antenna for the best reception.
For better reception of both FM and AM
•Make sure the antenna conductors do not touch any other terminals or connecting cords.
•Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
Do not connect the AC power cord until all other connections have been made.
For playing other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX jacks by using audio cords with mini plugs (not supplied).
To audio output
AUX
L 
R
To
Audio equipment
To audio output
When the audio equipment has pin jacks for audio output: Be sure that the pin plugs of the audio cords are colored— white plugs and jacks are for left audio signals, and red ones for right audio signals.
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
AC VOLTAGE
SET
SELECTOR
PROPER
BEFORE
ING UNIT TO AC
POWER SOURCE.
Connecting Other Equipment
To connect audio equipment
You can connect audio
• DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
Use a screwdriver to move the voltage selector so the voltage number is the same as the voltage where you are plugging in the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector on the bottom of the unit and all connection procedures are complete.
NOW you are ready to plug in the unit.
•If the wall outlet does not match the AC plug, use the supplied AC adaptor.
IMPORTANT:
Be sure to check that all connections have been made before plugging in the power cord.
7
