Listening to FM and AM Broadcasts (continued)
Presetting Stations
You can preset 30 FM and 15 AM stations manually.
In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.
On the remote control ONLY:
1 Tune in to the station you want to preset.
|
| • See “Tuning in to a Station” on page 10. |
| |
2 | Press PLAY MODE. | PLAY | ||
MODE | ||||
|
|
| ||
|
| The preset number starts flashing on the |
| |
|
| display. |
| |
|
| • The PRGM (program) indicator lights up on the |
| |
|
| display. |
| |
|
| PRGM |
| |
|
|
|
|
Tuning in to a Preset Station
On the remote control ONLY:
1 Press FM/AM to select either “FM” FM/AM or “AM.”
The unit automatically turns on and tunes in to the previously received
•Each time you press the button, the band alternates between FM and AM.
2 Press PRESET UP or | PRESET UP |
PRESET DOWN repeatedly to |
|
select a preset number. |
|
| PRESET DOWN |
To tune in to a preset station directly using the number buttons
On the remote control ONLY:
Pressing the number button(s) allows you to select the preset number you want.
Ex.: For preset number 5, press 5. | 1 | 2 | 3 |
|
|
| |
For preset number 15, press +10, then | 4 | 5 | 6 |
5. |
|
|
|
3 Press ¢ or 4 to select a preset number.
PRGM
You can also use the number button(s) to select a preset number.
Ex.: For preset number 5, press 5. For preset number 15, press +10,
then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
4 Press PLAY MODE again.
1 2 3
4 5 6
7 8 9
10 +10
PLAY
MODE
For preset number 20, press +10, then | 7 | 8 | 9 |
|
|
| |
10. | 10 | +10 |
|
For preset number 30, press +10, +10, |
|
|
|
then 10.
5 To preset more stations, repeat steps 1 to 4 above, allocating a different preset number to each station.
•Storing a new station on an already assigned number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The preset stations will remain in the unit.
11