WATER SUPPLY CONNECTOR FILTER

 

inlet water

 

 

valve

 

1.Pull out the filter and wash well.

2. Pull in the filter and connect

3. Check if there is a leakage.

 

the hose to the inlet water

Note to tighten up the

 

valve tightly.

connector.

CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.

1. Push the upper part

2. Open the cover as

3. Clean the filter.

4. Close the cover and insert the

of the filter and pull in.

shown in the figure.

 

lower part of the filter in the

 

 

 

basket first and then push the

 

 

 

filter with "click" sound .

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.

2. Rotate the filter counterclockwise and pull out the filter.

3. Remove dirts and rotate

the filter clockwise until it locks in position.

(pump drained washer)

1.Place a rag under washer filter not to wet the floor.

2.Turn the filter-cap to the left.

3.Take the filter out and

remove dirts. 4. Reassemble in

reverse order.

HOW TO ASSEMBLE THE LEGS

1. Check the 4 Legs.(Front-right. Front-left. Rear-right. Rear-left)

2. Lay down the Washing Machine to the front.

3. Insert the hook of leg in to the square hole of base.

4. Push the leg to the arrow direction to “Click”.

5. Finaly fix the legs on the base with screw like a figure.

Hook

Hole

Base

Screw

9