Samsung WAM1400/XE manual AA Installing on a wall, Connecting the Power Cord

❚❚ Connecting the Power Cord

1Connect the adaptor’s input power cord to the adaptor.

2Connect the adaptor’s output power cord to the DC 19V jack on the speaker.

3Push the power cord into the notch at the edge of the speaker bottom.

This lets the speaker rest flat when you stand it up.

NOTE

SPK ADD/Wi-Fi SETUP SERVICE DC 19V

99Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

AAInstalling on a wall

You can purchase a wall mount separately to install the speaker on a wall if you want.

`` Considerations for purchasing

-- Endurable load : Above 5.6 Kg

-- Hole size : 1/4 - 20 threaded insert

NOTES

99Since Wall-mount installation is optional, you must purchase the corresponding accessories separately. 99Please have a qualified installer install the Wall Mount Bracket.

99Ask a professional installation company to mount your product on the wall.

99Check the strength of the wall before you install the Wall Mount Bracket. If the strength is insufficient,make sure to reinforce the wall before installing the Wall Mount Bracket and the speaker on the wall.

99For more information, please refer to the Wall Mount's manual.

99Samsung Electronics is not liable for any damage to the product due to the product being installed inappropriately.

99Please beware not to install the speaker being laid down or turned upside down.

4444

11