Cooling Your Room
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed.
Remote Control | Control Panel | 1 | If necessary, press the | (On/Off) button. | |
| Result: | ◆ The operating mode indicator (COOL or FAN) on the | |||
|
|
| |||
|
|
|
| unit comes on. | |
|
|
|
| ◆ The air conditioner starts up in the mode selected | |
|
|
|
| when the unit was last used. | |
|
|
|
| ◆ The unit beeps twice. | |
☛The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up normally after a
2 If the COOL indicator is not lit up on the unit:
◆ Press the COOL button on the remote control or
◆Press the POWER/MODE button on the unit one or more times until
the COOL indicator lights up
Result: ◆ The unit beeps each time you press POWER/MODE. ◆ The air conditioner starts up in Cool mode.
➢You can change modes at any time.
3To adjust the temperature, press the 
or 
buttons on the remote
control one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result: | ◆ Each time you press the temperature buttons: |
| – The temperature is adjusted by 1°C and |
| displayed on the control panel |
| – The unit beeps |
| ◆ The air conditioner starts cooling if the room temperature |
| is higher than the selected temperature. |
4To set the fan speed to... Then...
| High | Press the |
| button on the remote control. |
|
|
|
|
|
| Low | Press the |
| button on the remote control. |
|
| |||
|
|
|
|
|
| Result: | Each time you press a button, the unit beeps. | ||
5To control the direction of the air flow, refer to page 10.
