washing a load of laundry

USING DRY COURSE

Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothe of 3.5kg (or 3.0kg(selected models)).

1.Open the door, put in the clothes and close the door again.

2.Press the Power button and then press the Drying button. : The standard course will be selected automatically.

Drying is availably selected only at the courses such as Cotton, Synthetics, Denim, Sports Wear, Daily Wash, Quick 15’, Spin and Rinse+Spin. (Put suitable amount of detergent and fiber softener in the detergent tray and close it again.)

3.Select Drying button as follows. Drying Programs

Every press of this button will select drying type repeatedly in the following order:

Cup Board Low Temp. Iron Time Dry (30min. 1:00min. 1:30min. 2:00min. 2:30min. 3:00min.) Cup Board

Drying Type

 

 

 

Information

Max

Time

 

 

 

Load

(Max Load)

 

 

 

 

 

 

 

 

 

 

 

Auto Drying

Cup Board(

)

Standard: Dries the laundry.

3.5 kg

160 min.

 

 

 

 

 

 

 

Low Temp.(

)

Dries the laundry at a low

2.0 kg

210 min.

 

 

 

 

temperature to protect the texture

 

 

 

 

 

 

of the laundry.

 

 

 

 

 

 

 

 

 

 

Iron(

)

 

For leaving items partially damp

2.0 kg

140 min.

 

 

 

 

so that it can be easily ironed

 

 

Time Drying(

)

 

 

You can select the appropriate

3.5 kg

180 min.

 

 

 

 

drying time depending on the

 

 

 

 

 

 

texture, quantity, and moisture.

 

 

 

 

 

 

 

 

 

It automatically displays Drying Time by sensing the weight of clothes before drying for increasing the drying effect.

For laundry weighing less than 3.5kg, use the Auto Dry. For laundry that weighs more, please use the Time Dry.

If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying efficiency.

When using the drying cycle, check if the water supply valve is opened.

4.Press Start/Pause button.

:It automatically performs an optimal function from washing to drying.

The selected course can’t be altered after the start of drying.

If you select Drying function, the intensity of SPIN will be set up as High in default for increasing the drying effect.

If cold water is not supplied, drying will not be performed.

If you do not take out clothes from the tub after the end of drying, a function of wrinkle protection will be performed for about 30 minutes with the display of [End]. In order to take out the clothes: press firstly Start/Pause or Power button and take them out.

In case you wish to dry after hand washing, select both Spin and Dry at the same time.

26_ washing a load of laundry

WD0704RE-02829C_EN.indd 26

2010-7-16 16:32:01

Page 26
Image 26
Samsung WD0704REC/XSG manual Using DRY Course