Ice & Water display
Using the display options
Bottle Chill
17
This function allows you to chill your beverages in the freezer without the worry of forgetting about them.
When activated, place your beverage into the freezer and after the set time has elapsed, Bottle Chill will remind you to remove your beverage by sounding an alarm. The user alarm will continue to sound until any key on the panel is pressed.
The time taken to chill depends on the size of your beverage. Bottle Chill allows you to customise this chill time.
Recommended times:
20 minutes – can or small bottle
25 minutes – wine bottle or similar size beverage
30 minutes – larger bottle
If you remove your beverage from the freezer and it is not chilled to your liking, reset the timer to 10 minutes and place the beverage back into the freezer.
To activate, use |
| button until the Bottle Chill icon ( | ) is showing on the |
| |||||
|
|
| screen. Then use the or | buttons until the snowflakes ( ) and the |
| ||||
|
|
|
| ||||||
minute timer ( |
| ) are displayed on the Bottle Chill screen. |
| ||||||
Then use the | button to select 10, 15, 20, 25 or 30 minutes as displayed on the Bottle Chill |
| |||||||
screen. After several seconds, the snowflakes will then animate as the timer counts down. |
| ||||||||
An alarm will sound after the amount of time selected has elapsed. |
| ||||||||
Press any button on the display to silence the alarm. Remember to remove the beverage from |
| ||||||||
the freezer. |
|
|
|
|
|
|
|
| |
To deactivate Bottle Chill manually, use the |
|
| button to scroll to the Bottle Chill icon ( | ) | |||||
|
| ||||||||
on the |
|
|
| screen, then use the | and | buttons until no minutes are shown on | |||
|
|
|
the screen and the snowflakes () are no longer visible.
Important!
Do not leave the bottle inside the freezer longer than the time needed for chilling, as glass bottles may explode.