Fisher & Paykel E442BRXFDU, RF610ADUX Ventilation and installation, E402B E442B E522B RF610A

Installation instructions (all models)

3. Ventilation and installation

7

To ensure adequate ventilation for your refrigerator and it’s correct operation see recommended cabinetry dimensions below.

The appliance is intended to be placed against a wall with a free distance not exceeding 75 mm. These measurements do not include space for the water filter at the back of the cabinet as we recommend that the filter is placed as close to the incoming water supply as possible.

Cabinetry dimensions (mm) (including minimum air clearances)

E402B E442B E522B RF610A

Ainside height

Flush with refrigerator chassis – full door rotation

1745

1745

1745

1810

B	inside width	675	720	830	940
C	inside depth	620	620	620	620
	Flush with refrigerator door – full door rotation
D	inside width	705	750	860	1000
E	inside depth flush to curved door	675	675	675	–
F	inside depth flush to flat door	690	690	690	690
	Flush with refrigerator door – 90° door rotation
G	inside width	745	790	900	1010
H	inside depth flush to curved door	675	675	675	–
I	inside depth flush to flat door	690	690	690	690
	Minimum clearances
J	side clearance	20	20	20	20
K	side clearance – hinge side flush with door – full rotation	50	50	50	50
L	side clearance – hinge side flush with door – 90° rotation	90	90	90	90
M	rear clearance (incl. evaporator tray)	30	30	30	30
N	vent	50	50	50	50