8

Installation instructions (Ice & Water models only)

To continue installation of Non Ice & Water models see page 9.

Important!

It is recommended that an authorised plumber in your city or town is used to install the water connection.

The new tubings supplied with the refrigerator are to be used, old tubings from old Ice & Water connections should not be used.

Installation precautions/warning

DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

WARNING – connect to potable water supply only.

DO NOT install on line pressure above 900 kPa or below 150 kPa. DO NOT use on hot water supply, 38°C max.

DO NOT install in a location that is susceptible to freezing temperatures as damage to the housing could occur.

AVOID contamination of pipes during installation.

DO NOT use copper tubing. The plastic tubing supplied should always be used.

1Read pages 9 – 12 carefully, and then turn refrigerator on.

2The first time you require water out of the dispenser, there will be a delay while the water reservoir fills up.

3Run a further 3 L through the system, stopping intermittently to ensure the reservoir is flushed out. Failure to do this will result in excessive dripping from your dispenser.

4Press until the Ice menu is highlighted then press to turn on the ice maker. Press together to force a cycle. The ice tray will flip. Force another cycle. The ice tray will flip and spill the water into the ice bin. Empty water and replace bin.

5You are now ready to enjoy chilled water and ice dispensing from your Active Smart™ refrigerator.

Please note that once installation is complete a few drips may appear out of the dispenser over the next few days as the remaining trapped air is cleared.

Note: If you want to install a water filter see page 22.

Important!

All connections must be checked for leaks.

Ensure white 6 mm tubing is routed away from sharp objects, sharp corners (beware of kinking tube as this will stop water flow), clear of the refrigerator unit

compartment and not in a location where it can be squashed. Ensure all push-fit connections are firmly pushed into place. The tube should push in 20 mm before reaching the stop.

If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully inserted to avoid leaks. To remove tube from connection points, turn off the

isolating faucet, push in the collet and gently pull tubing at the same time, as shown in Diagram 1.

Diagram 1

Page 9 Page 11
Page 10
Image 10
Fisher & Paykel RF610ADUX, E522BLXFD Installation instructions Ice & Water models only, Installation precautions/warning
Page 9 Page 11

E442BRXFDU, E522BRXFDU, E442BLXFD, E522BLXFD, RF610ADUX specifications

Fisher & Paykel is a renowned brand known for its innovative and stylish kitchen appliances, particularly its refrigerators. The models RF610ADUX, E522BLXFD, E442BLXFD, E522BRXFDU, and E442BRXFDU epitomize the company’s commitment to quality, efficiency, and modern design.

The RF610ADUX is a large French door refrigerator that combines functionality with a sleek aesthetic. It features ActiveSmart technology that continuously senses and adapts to your usage patterns, ensuring optimal temperature control and energy efficiency. The ultra-low frost design reduces the need for manual defrosting, while the spacious interior includes adjustable shelving and a spacious freezer drawer.

Moving on to the E522BLXFD, this fridge offers a dual freezer design, providing flexible storage options. The built-in water dispenser and ice maker enhance convenience, while the energy-efficient compressor helps in reducing electricity bills. Its individual temperature control zones allow for the preservation of food at its best, ensuring freshness for longer periods.

The E442BLXFD model is equally impressive, with its modern design and large capacity. This fridge also utilizes ActiveSmart technology, optimizing airflow for even cooling. Its external ice and water dispenser adds practicality, and the stainless-steel finish gives it a contemporary look that fits any kitchen décor.

The E522BRXFDU takes functionality a step further with advanced features like a seamless integration with kitchen cabinetry, providing a streamlined look. Its dual compartments allow for organized storage, while the efficient cooling system ensures that food remains fresh longer.

Lastly, the E442BRXFDU combines performance and design, offering a spacious interior suitable for larger families. The fridge features an innovative humidity control system in the crisper drawers that helps keep fruits and vegetables fresher for longer. Its touch control panel allows for ease of use, and its energy-efficient design promotes sustainability.

In summary, Fisher & Paykel’s RF610ADUX, E522BLXFD, E442BLXFD, E522BRXFDU, and E442BRXFDU refrigerators are distinguished by their advanced technologies, user-centric designs, and energy-efficient features. Whether you need a simple storage solution or a state-of-the-art cooling system, these models are equipped to meet a variety of kitchen needs while enhancing the overall aesthetic of your home.
Top Page Image Contents