Samsung WD136UVHJSM/YL manual Washing clothes using the cycle selector, Pause Option

washing a load of laundry

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.

1.Turn on your sink’s water tap.

2.Press the Power button.

3.Open the door.

4.Load the articles of clothing one at a time loosely into the drum, without overfi lling it.

5.Close the door.

6.Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.

Pre-wash is only available when selecting the Baby Care course. It is only necessary if your clothing is heavily soiled.

7.Use the Cycle Selector to select the appropriate cycle according to the type of material: Cotton, Quick Wash, Wool, Bedding, Anti-Bacterial, Super Eco Wash, Sports Wear, Baby Care and Night Care. The relevant indicators will illuminate on the control panel.

8.At this time, you can control the wash temperature, the number of rinse cycles, the spinning speed, and the delay time by pressing the appropriate option button.

9.Press the Start/Pause button on the Cycle Selector and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

1.Within 5 minutes of starting a wash, it is possible to add/remove laundry items to the wash.

2.Press the Start/Pause button to unlock the door.

3.The door cannot be opened when the water is too HOT or the water level is too HIGH.

4.After closing the door, press the Start/Pause button to restart the wash.

When the cycle is fi nished:

After the total cycle has fi nished, the power will turn off automatically.

1.Open the door.

2.Remove laundry.

English - 30

WD136UVHJSM-03129G-03_EN.indd Sec5:30 2016-04-07 ￿￿ 9:53:09