TO ADD LAUNDRY
1.Press the Stop&Add button.
•The washing machine will automatically pause to operate.
2.Wait about 30 seconds and check the Stop&Add button for the lamp state.
•Blinking: the machine drains water down to the safety level so it can get an additional quantity of laundry (displayed in pause mode)
•Off: adding the laundry is possible.
The washing machine detects the internal quantity of laundry about 30 seconds before deciding whether it could get more laundry.
3.Add the laundry.
4.Press the Start/Pause Button.
•Avoid adding the laundry when the machine has foamed up or is filled with water. Otherwise, the foam or water may leak out of the door. So check it first before opening the door.
USING CLEAN TUB
Is a course for washing the tub.
1.Press Power button.
2.Select the Clean Tub Course by turning the dial of Course Select.
3.Put an adequate amount of bleaching agent in the detergent tray (
) for Main Laundry. (See “Washing for the first time”.)
: You’d better use a
If you want to wash it lightly : You may wash it just by selecting the
4.Press Start/Pause button.
About one time a month is enough for the
02 Washing a load of laundry
Washing a load of laundry _17
