Amana W101611016 operating instructions Care and Cleaning, Reverse the Door

CARE AND CLEANING

Control Panel - Clean with a soft, damp cloth. Do not use abrasive substances. Do not spray cleaners directly on the panel.

The control panel finish could be damaged by some laundry pre-treatment soil and stain-remover products. Apply such products away from the dryer and wipe up any spills or oerspray immediately.

Tumbler - Remove any stains such as crayon, ink pen or fabric dye (from new items such as towels or jeans) with an all-purpose cleaner. Then tumble old towels or rags to remove any excess stain or cleaning substance Once these steps are done, stains may still be visible, but should not transfer to subsequent loads.

Dryer Exterior - Clean with a soft, damp cloth. Do not use abrasiv e substances. Protect the surface from sharp objects.

Dryer Exhaust System - Should be inspected and cleaned once a year to maintain optimum performance. The outside. exhaust hood should be cleaned more fre- quently to ensure proper operation. (Refer to the Installation Instructions for more information.)

REVERSE THE DOOR

Instructions for reversing the dryer door:

1)Remove 2 hinge screws holding door hinge in place.

2)Remove the door and lay carefully aside.

3)Remoe 2 hinge screws on the opposite side of door hinge.

4)Remoe 2 screws on the door catch plate.

5)Move door catch plate to opposite side and attach with screws.

6)Move the door to the opposite side and replace 2 hinge screws.

7)Replace 2 hinge screws in opposite holes.

10