Amana W101611016 operating instructions Step, Using the Controls

USING THE CONTROLS

Step 1

SELECT CYCLE

To select a cycle, rotate the Cycle Selector dial to the desired cycle.The indicator light by the cycle name will illumi- nate.

The Regular and Wrinkle Control cycles are Sensor Dry cycles. Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (very dry to damp dry) is reached.

Regular

The Regular cycle is designed to dry loads such as towels, underwear, jeans, etc.

Wrinkle Control

The Wrinkle Control cycle is designed to dry wrinkle-free cottons, synthetic fabrics, knits and permanent press fabrics automatically. The cycle minimizes wrinkling by providing a longer unheated cool-down period at the end of the cycle.

Time Dry

Time Dry allows you to select the desired cycle time in minutes.Turn the Cycle Selector dial to Time Dry, then press the Time up arrow to set the drying time. Press the arrow repeatedly to scroll through the time settings.To add or subtract time from the cycle, see Options-Adjust Time, page 8.

Control features vary by model.

Delicates

The Delicates cycle is designed to dry heat-sensitive items at the low drying temperature.

Air Fluff

The Air Fluff cycle tumbles the load in room temperature air.

Wrinkle Release

The Wrinkle Release cycle will release wrinkles from items that are clean and dry but only slightly wrinkled, such as from a crowded closet or suitcase or from sitting in the dryer too long after the cycle has ended. Wrinkle Release can be used with any temperature selection.

6