![](/images/new-backgrounds/1255566/25556617x1.webp)
USING THE CONTROLS
Step 4
SELECT OPTIONS(IF DESIRED)
Adjust Time
Time can be added or subtracted from the automatically set
times in the Time Dry, Delicates, Air Fluff, Wrinkle Release cycles.
To add or subtract time from the cycle, press the Adjust
Time up or down arrow pad until the desired time is displayed.
End of Cycle Chime
When the cycle is complete, an audible chime will sound. When the Wrinkle Prevent option is selected, the chime will sound intermittently.
Turn off the chime by pressing the Chime pad.
Press the pad repeatedly to scroll through the choices.
Wrinkle Prevent
Wrinkle Prevent provides approximately 95 minutes of inter- mittent tumbling in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent pad to acti- vate this feature. The indicator light above the pad will illumi- nate when Wrinkle Prevent is selected. Chasing lights appear in the display when the Wrinkle Prevent option is selected (select models). The load is dry and can be removed at any time during the Wrinkle Prevent cycle.
Control Lock
The control panel can be locked for safety , cleaning or to pre- vent unwanted use. The panel will not function when locked.
To lock the controls, pr ess and hold the Sensor Dry Level and Temperature pads for 3 seconds. The Control Lock indicator light will illuminate.
To unlock the controls, press and hold the Sensor Dry Level and Temperature pads for 3 seconds. The Control Lock indicator light will go out.
Step 5
START THE DRYER
Press the Cycle Selector dial to start the dryer. The dryer door must be closed for the dryer to operate. If the door is opened during the cycle, the Cycle Selector dial must be pushed again to resume the cycle once the door is closed.
8