Troubleshooting
Troubleshooting
Problem | Action |
•Make sure the Auto Detergent and Auto Softener settings are properly configured.
•Make sure you use the recommended types of detergent as
Excessive suds. |
| appropriate. |
|
|
| |
• | Use high efficiency (HE) detergent to prevent oversudsing. | |||||
| ||||||
| • Reduce the detergent amount for soft water, small loads, or | |||||
|
| lightly soiled loads. |
|
|
| |
| • |
|
|
| ||
|
|
| ||||
| • Make sure the remaining amount of detergent and fabric | |||||
Cannot apply |
| softener is not over the limit. |
|
|
| |
• | Make sure the Auto Dispense function is activated, with both | |||||
additional detergent. | ||||||
| the Water Hardness and Concentration settings properly | |||||
|
| |||||
|
| specified. |
|
|
| |
|
|
|
| |||
| • Plug the power cord into a live electrical outlet. |
| ||||
| • Check the fuse or reset the circuit breaker. |
|
|
| ||
| • | Close the door and press or tap Start/Pause |
| to start the | ||
|
| |||||
|
| |||||
|
| washing machine. |
|
|
| |
|
| For your safety, the washing machine will not tumble or spin | ||||
|
| unless the door is closed. |
|
|
| |
| • | Before the washing machine starts to fill, it | will | make a series | ||
|
| of clicking noises to check the door lock and does a quick | ||||
Stops. |
| drain. |
|
|
| |
| • There may be a pause or soak period in the cycle. Wait briefly | |||||
|
| and the washing machine may start. |
|
|
| |
| • Make sure the mesh filter of the water supply hose at the | |||||
|
| water taps are not clogged. Periodically clean the mesh filter. | ||||
| • | If the washing machine is not supplied with sufficient power, | ||||
|
| the washing machine temporarily will not drain or spin. As | ||||
|
| soon as the washing machine regains sufficient | power, it will | |||
|
| operate normally. |
|
|
| |
50 English
2017/2/23 16:00:07
