Installation
Installation
8. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten.
9. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above.
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer,
NOTE
•After connecting the water hose to the adaptor, check if it is connected properly by pulling the water hose downwards.
•Use a popular type of water taps. If the tap is
24 English
2018/2/22 14:59:35
