Troubleshooting
Troubleshooting
Code |
| Action | |
|
| ||
| The electronic control needs to be checked (Over Voltage Error). | ||
| • Check the PCB and wire harness. | ||
| • Check if power is supplied properly. | ||
| • If the information code remains, contact a customer service | ||
UC |
| centre. | |
|
| ||
| Low voltage detected | ||
| • Check if the power cord is plugged in. | ||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
| ||
| High temperature heating check | ||
HC | • | If the information code remains, contact a customer service | |
|
| centre. | |
|
| ||
| The Water Level sensor is not working properly. | ||
| • Try power off and restarting the cycle. | ||
| • Check WaterLevel Sensor wire harness. | ||
| • If the information code remains, contact a customer service | ||
1C |
| centre. | |
|
| ||
|
| NOTE | |
|
| When the washer displays the “1C” code, the washer do | |
|
| draining for 3 minutes. During this time, the Power button is | |
|
| inoperative. | |
|
| ||
| The MEMS sensor is not working properly. | ||
8C | • Turn the machine off, and restart the cycle. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
|
| ||
| Check communications between main and sub PBAs. | ||
AC | • Try power off and restarting the cycle. | ||
• | If the information code remains, contact a customer service | ||
| |||
|
| centre. | |
|
| ||
| Check communications between main and inverter PBAs. | ||
| • Depending on the state, the machine may automatically returns | ||
AC6 |
| to normal operation. | |
• | Turn the machine off, and restart the cycle. | ||
| |||
| • If the information code remains, contact a customer service | ||
|
| centre. | |
|
|
| |
If any information code keeps appearing on the screen, contact a local Samsung service centre.
62 English
2018/2/22 15:00:01
