Delay End

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.

1.Select a cycle with necessary settings.

2.Press Delay End (or the +/- button) repeatedly until a desired end time is set.

3.Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the washing machine tumbles the drum to sense the weight of the load if load sensing is preset for the selected cycle. When complete, it displays your set time with the timer running.

4.To cancel the Delay End, restart the washing machine by pressing Power.

Real-life case

You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay End option to the current cycle with the 3-hour setting, and Press and hold Start/Pause (Hold to Start) at 2:00 p.m. Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m. Provided below is the time line for this example.

 

 

 

 

 

2:00 pm

3:00 pm

5:00 pm

 

Set the Delay End to 3 hours

Start

End

 

 

 

 

Load sensor

The load sensor icon lights up when you select a cycle that supports load sensing. Some cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays solid during the load sensing process, and turns off when the process is complete.

English  41

Operations

WD90(80)N643OAW_03927B-00_EN.indd 41

2018/2/22 14:59:57

Page 41
Image 41
Samsung WD90N643OAW/EE manual 200 pm 300 pm