Installing the Washing Machine

Unpacking the Washing Machine

Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.

Overview of the washing machine

 

Cover top

 

Control panel

 

 

Detergent drawer

Drain Hose

 

 

 

Door

 

Cold Water supply

 

 

hose

 

Debris filter

 

Base cover

Plug

Bolt hole covers

 

 

 

Adjustable feet

 

 

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)

Away from direct sunlight.

Adequate ventilation

Room temperature that will not fall below 0˚C

Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1.Loosen the leg bolt by turning it with your hand until it is at the desired height.

2. Tighten the locking nut by turning it with the wrench.

Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs.

(Only a 1 degrees angle is allowed.)

3

WF-J1462-02349A_EN.indd

3

2006-03-27

ソタネト 3:53:32