INFORMATION CODES

Information codes may be displayed to help you better understand what is occurring with your Washer.

CODE SYMBOL

MEANING

SOLUTION

 

Unbalanced load prevented your

Redistribute the load, press the Start/Pause

 

Washer from spinning.

Button.

 

Door is unlocked when Washer is

Press the Power button to turn off your Washer,

 

running.

then restart the cycle. If the code reappears, call

 

 

for service.

 

Door is open when Washer is

Close the door tightly and restart the cycle.

 

running.

If the code reappears, call for service.

 

 

 

Your Washer failed to lock the

Close the door tightly and restart the cycle.

 

door.

If the code reappears, call for service.

 

 

 

Water temperature control

Call for service.

 

problem.

 

 

(Heater Control problem)

 

 

Your Washer has tried to fill but

Call for service.

 

has not reached the proper water

 

 

level.

 

 

The door will not unlock.

Make sure the door is firmly closed.

 

 

Push the Power button to turn off your Washer,

 

 

then turn it on again. If the code reappears, call

 

 

for service.

 

Motor not running properly.

Restart the cycle pressing the Start/Pause

 

 

Button. If the code reappears, call for service.

 

Your washer is not draining.

Before calling for service, check the following.

 

It can also mean that the unit

1) Turn off the unit and turn it on again.

 

senses a small clog while draining.

2) Select only the Spin Cycle.

 

 

3) Press the Start/Pause to drain the water.

 

 

If it still does not drain, call for service.

 

Your Washer has tried to fill but

Make sure the water faucets are open all the

 

was unsuccessful.

way. Check for kinked hoses.

 

 

Check the inlet screens on the fill hoses.

 

The hot/cold water hose

Please connect the hot/cold water hose

 

connection is not correct.

connection correctly.

 

 

 

 

Problem with control.

Call for service.

 

 

 

 

Electric service was lost when

Restart the cycle by pressing the Start/Pause

 

Washer was running.

Button.

 

A fault is detected in the water

Call for service

 

level sensor.

 

 

Jammed Key.

Call for service

 

 

 

Troubleshooting 05

Troubleshooting _21

WF337A-02440C-05_EN.indd 21

 

 

2009-11-02 ¿ÀÈÄ 6:08:39