Samsung WF520ABP/XAA Information codes, troubleshooting _35, Start, Pause, Power, Power, MEANING, SOLUTION, Error Image, Start/Pause, First of all, clean up the drain filter

Information codes

Information codes may be displayed to help you better understand what is occurring with your washer.

Error Image	MEANING	SOLUTION
Unbalanced load	Unbalanced load prevented your	Redistribute the load, press the Start/
	washer from spinning.	Pause button.
ile the washer was running.	Door is unlocked when washer is	Press the Power button to turn off your
	running.	washer, then restart the cycle. If the
The Door was unlocked wh-
		code reappears, call for service.
	Door is open when washer is running.	Close the door tightly and restart the
Door is open.		cycle.
		If the code reappears, call for service.
	Your washer failed to lock the door.	Close the door tightly and restart the
The Washer door would not		cycle.
lock.
		If the code reappears, call for service.
Water Temperature Control	Water temperature control problem.	Call for service.
Problem	(Heater control problem)
Water Level Sensor Problem	Water level sensor problem	Call for service
Water Leakage Problem	Your washer has tried to fill but has not	Call for service.
	reached the proper water level.
	The door will not unlock.	Make sure the door is firmly closed.
The Door will not unlock.		Press the Power button to turn off
		your washer, then turn it on again. If the
		code reappears, call for service.
	Your washer is not draining.	First of all, clean up the drain filter.
	It can also mean that the unit senses a	Then check the following. Clean the
		filter (See page 30).
	small clog while draining.
		or
No Draining		1. Turn off the unit for 10 seconds and
		then turn it on again.
		2. Select the Spin Only cycle.
		3. Press the Start/Pause to drain the
		water.
		If it still does not drain, call for service.

troubleshooting 05

troubleshooting _35

WF520AB-02838A-02_EN.indd 35 2010-09-01 �� 4:06:05