Samsung WF8528N7W/YLE, WF8520N7W/YLE manual Connecting the Water Supply Hose Option

CONNECTING THE WATER SUPPLY HOSE (OPTION)

1. Remove the adaptor from the water supply hose.

2.	First, using a ‘+’ type screw driver, loosen the four screws on
	the adaptor. Next, take the adaptor and turn part(b) following
	the arrow until there is a 5mm gap.
3.	Connect adaptor to the water tap by tightening the screws
	firmly.	a
	Then, turn part (b) following the arrow and put(a) and (b)	b
	together.
4.	Connect the water supply hose to the adaptor. Pull down
	part (c) of the water supply hose.
	When you release part (c) the hose automatically connects		c
	to the adaptor making a ‘click’ sound.
5.	Connect the other end of the water supply hose to the
	inlet water valve at the rear of the washer. Screw the hose
	clockwise all the way in.

After completing connection, if water leaks from the hose, then repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Installing the washing machine _9

01 Installing the washing machine

WF8520N7-02418F_EN.indd 9

2008-06-19 ¿ÀÈÄ 3:55:24