setting up your washing machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
Adoptor
Water supply hose
2.First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.
1 | 5 mm | |
2 | ||
|
3.Connect the adaptor to the water tap by tightening the screws firmly. Turn part (2) following the arrow and connect
(1) and (2).
1
2
4.Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.
After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.
3
5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the hose clockwise all the way in.
14_ setting up your new washing machine
