67
Factory reset
If you wish to completely reset your radio to its initial state this may be
performed by following this procedure. By performing a factory reset, all
user entered settings will be erased.
1. Access the main menu by pressing the Menu button until the 'Main
menu' option is shown, then select this with the Tuning/Select
control.
2. Rotate the Tuning/Select control until 'System settings' is selected
on the display. Press the control to enter the system settings menu.
3. Rotate the Tuning/Select control until 'Factory Reset' is selected on
the display then press the control. Rotate the Tuning/Select control
and highlight 'YES' to proceed.
If you do not wish to carry out a system reset, highlight 'NO' and then
press the control. The display will revert to the previous menu.
4. With 'YES' highlighted, press the Tuning/Select control. A full reset
will be performed. The station list together with any preset stations
will be erased and your wireless network connection details will be
lost. All confi guration settings will be restored to their defaults, the
clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described
above to resume normal operation. It may be necessary in some cases
to disconnect the mains power and remove the batteries, then reconnect
power after 10 seconds.
In case of malfunction due to electrical fast transient (burst), reset the
product as above (reconnection of the power source may be required) to
resume normal operation.
1
1-4