Connecting to your computer network - cont.
8. If your network is not found, it is possible that it is confi gured such that
the SSID is not broadcast (sometimes referred to as hidden). If this
is the case then the name will not be visible in the list (there may be
a blank entry). You will then need to use the Tuning/Select control
to point to the '[Manual confi g]' option, and then you should press the
control to enter manual confi guration. This procedure is described in
the 'Network Confi guration Menu', see page 14, 'Entering the network
name manually'.
If you know that your network name is not hidden, and it was not found,
then try re-scanning (press the Back button), and if necessary try
moving your radio to a location closer to your access point / router.
9. When the SSID for the wireless network you wish to connect to is
highlighted on the screen, press the Tuning/Select control.
10. If your network is confi gured without an encryption code, the screen
should say 'Connecting...', and then show the main Internet Radio
menu.
If this is the case then you have successfully connected your radio to
your network, so please proceed to paragraph 13 on the next page.
11. If the screen displays 'Key:' , it is because the network is using one
of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi
Protected Access (WPA). You therefore need to enter the correct WEP
or WPA key into the radio to allow it to communicate with your wireless
network.
If you do not have the WEP or WPA key, then you should obtain it
from the person who set up your network. Some wireless routers may
come with an encryption key already set up by the supplier, in which
case you should refer to the user documentation provided with it.
11
8-9