Washing a Load of Laundry
Childlock(button lock function)
Is a function for children not to handle the washing machine..
SETTING/RELEASE
If you want to set up or release that function, press both Temperature and Drying Time buttons at the same time in 3sec.
How to Set up:
1.It can be set up during the
2.If you set up the CHILDLOCK function during the laundry operation, no button except for Power button can be controlled until you release that function.
3.The CHILDLOCK lamp will be lighted. [ 
]
Notice:
1.In case the power is on again, the CHILDLOCK function remains unchanged.
2.In case of releasing that function, follow the way of release mentioned above.
NOTICE: When the other buttons, except for the Power button, are not controlled after you turn on the Power , check "CHILDLOCK LAMP", please.
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1.Turn on your sink's water faucet.
2.Press the Power button.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Add the detergent, softener, and prewash
detergent (if necessary) into the appropriate compartment.
Note: Prewash is only available when washing Cotton, Baby cotton, Towel, Coloureds, Bedding.
It is only necessary if your clothing is heavily soiled.
7. Turn the Fuzzy Control dial to select the appropriate program for the type of clothes Cotton, Baby cotton, Towel, Coloureds, Quick, Wool, Delicates, Bedding, Clean Tub.
You will see the indicators light up on the control panel.
Washing a Load of Laundry
8.At this time, you can control the wash temperature, rinsing times, spin speed, delay time ,silver wash, drying time or drying selector by pressing the appropriate option button.(delay time, silver wash, drying time and drying selector button can be selected optionally by user.)
9.Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
Until water supply is completed after starting operation, it is possible to put in the laundry or take out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on continuously.
When the cycle is finished:
After the total cycle has finished,the power will turn off automatically.
1.Open the door.
Note : The door will not open untill the machine stops or the power turns off.
2.Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1.Turn the water supply on.
2.Press the Power button on the washing machine.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Put the detergent and, if necessary, softener or prewash detergent, in the appropriate compartments.
7.Press the Temperature button to select the temperature (cold water, 30˚C, 40˚C, 60˚C, 75˚C, 95˚C)
8.Press to rinse button to select the required number of rinse cycles. Maximum number of rinse cycles is six.
The washing duration will be prolonged accordingly.
9.Press the Spin button to select the spin speed.
10.Press the Delay Start button repeatedly to cycle through the available delayed start options (up to 24 hours mximum in one hour increments.). Displayed hours means the time of ifinished
11.Press the Start/Pause button and the machine will begin the cycle.
10 SAMSUNG Washing Machine Owner’s Instructions | SAMSUNG Washing Machine Owner’s Instructions 11 |
