If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1Press the MENU
()
button.
Result:The main menu is displayed.
2Press the ▼or ▲ button to select Setup.
Result:The options available in the Setup group are
displayed.
3Press the ENTER () button.
4Press the ▼or ▲ button to select Blue Screen.
5To activate this feature, select On by pressing the œ or √button.
6When you have finished, press the EXIT ( ) button to exit.
Setting the Blue Screen
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1Press the MENU
()
button.
Result:The main menu is displayed.
2Press the ▼or ▲ button to select Picture.
Result:The options available in the Picture group are
displayed.
3Press the ENTER () button.
4Press the ▼or ▲ button to select Tilt.
5Press the œ or √button to reach the required setting (-7 to +7).
6When you have finished, press the EXIT ( ) button to exit.
Using the Tilt Control Feature
Move
œœ √√
Adjust Return
Setup
Plug & Play
√√
Language : English
Time
√√
Blue Screen
œœ
On
√√
Melody : On
Demonstration
√√
TV
Move
œœ √√
Adjust Return
Picture
……
More
Tilt
œœ
3
√√
PIP
√√
TV
English-25
AA68-03336A-01Eng 6/28/04 4:08 PM Page 25