Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top-boxes and the
TV source (broadcast or cable)
1Press the MENU
()
button.
Result:The main menu is displayed.
2Press the ENTER () button to select Input.
Result:The options available in the Input group are
displayed.
3Press the ENTER () button again to select Source List.
Result:The options available in the Source List group are
displayed.
4Press the or button to select signal source, then press the
ENTER () button.
When you connect equipment to the TV, you can choose
between the following sets of jacks : EXT1 or EXT2 on the
TV’s rear panel, and EXT3/S-Video on the TV’s side panel.
You can also set these options simply by pressing the
SOURCE ()
button. If you change the external
source while viewing, pictures might take a short period of
time to be switched.
Edit Name
1Press the MENU
()
button.
Result:The main menu is displayed.
2Press the ENTER () button to select Input.
Result:The options available in the Input group are
displayed.
3Press the or button to select Edit Name . Press the ENTER
() button.
Result:The options available in the Edit Name group are
displayed.
4Press the or button to select external device :
EXT1
-
EXT2
-
EXT3
-
S-Video.
5Press the ENTER () button.
6Select the name by pressing the ¦or button.
7Set other signal sources (EXT1, EXT2, EXT3, S-Video) using the
same method as listed above.
8When you have finished, press the EXIT ( ) button to exit.
Viewing an External Signal Source/Edit Name (depending on the model)
Move Enter Return
Input
Source List : TV
Edit Name
TV
Move Enter Return
Input
Source List : TV
Edit Name
TV
Move
œœ
Adjust Return
Edit Name
EXT1
œœ
------
EXT2 : ------
EXT3 : ------
S-Video : ------
TV
Move
œœ
Adjust Return
Edit Name
EXT1
œœ
DVD
EXT2 : ------
EXT3 : ------
S-Video : ------
TV
Move Enter Return
Source List
TV
EXT1 : ------
EXT2 : ------
EXT3/S-Video : ------
TV
English-35
AA68-03336A-01Eng 6/28/04 4:08 PM Page 35