Pioneer KRP-S02 Installation On The Flat Panel Display, When using the table top stand, English

English

INSTALLATION ON THE FLAT PANEL DISPLAY

Flat panel display with the speaker installed

Speaker bracket (for TOP-Right)

Speaker mounting screw (M5 × 10 mm)

Speaker

Speaker bracket (for BOTTOM-Right)

Speaker mounting screw (M5 × 10 mm)

Speaker mounting	Speaker mounting
screw (M5 × 10 mm)	screw (M5 × 10 mm)

Speaker mounting	Speaker mounting
screw (M5 × 10 mm)	screw (M5 × 10 mm)

Cable clamp* Speaker cable* Cable clamp*

Speaker bracket (for TOP-Left)

Speaker mounting screw (M5 × 10 mm)

Speaker

Speaker bracket (for BOTTOM-Left)

Speaker mounting screw (M5 × 10 mm)

English

*: Accessories of the flat panel display

When using the table top stand:

 NOTE:

Before attaching the speaker, please attach the KRP-TS01 series table top stand (or another flat panel display stand) to the flat panel display.

1. Attaching the Speaker Brackets to the Speakers.

There are top and bottom speaker brackets for both the left and the right speakers. Attach the appropriate brackets to the top and the bottom on the back of the speakers using the supplied screws.

(It shows the attachment of the bracket on the right side. It is attached on the left side by the same procedure.)

Speaker bracket

(For TOP-Right)

Speaker bracket

(For BOTTOM-Right)

Screw holes

Screw holes

Speaker bracket (For BOTTOM-Right)

Speaker bracket (For TOP-Right)

Place the speaker so its terminals (bottom) are facing you.

9